Crash Resistant Barrier

Information

Protect entryways from unauthorized vehicles with a high impact load bearing barrier.

Clear Passage Width (in m)	3-6
Height Of Pole Above Ground (in m) (approx.)	0.9
Drive	Electro-mechanical

Main Voltage Supply (In V)	230
Power Frequency (In Hz) 50-60	50-60
Nominal Power (In kW)	0.3
Supply For Control Panel (In V)	24
Drive Unit	Worm Gear Drive
Torque (In Nm)	170
Protection Class	IP55
Controller Type	PLC
Power Failure/Emergency Operation	By Friction Clutch
Impact Rating (Approx. kN)	350

Temperature (In °C)	-15 to +60
Humidity	90%
Barrier Housing (Approx. mm)	Steel 450 x 400 x 1180
Boom Length (Clear Opening) (Approx. m)	6
Operation Time (Approx. s)	9-12 (Depending On Boom Length & Impact Rating)

Barrier pole: Heavy-duty metal profile with steel rope/chain support according to statistical requirements.
Pole support: 1 no. steel rest posts with pole lead-in, side support and rubber buffer.
The rest post also acts as impact resistance in case of violent attacks while the barrier pole is in a closed position and locks the boom preventing the boom from lifting from below in case of a crash.
The barrier pole is bolted to a wishbone-mounting pivoting on ball bearings.
The bottom part of the casing consists of the base plate with an opening for cable conduits and bores for the anchor bolts.
Roller bearings of barrier pole is equipped with life lubrication.
Barrier drive: Electro-mechanical drive unit with gear motor in adequate size, 230 V, 50 Hz.
Electrical control and control equipment: The electrical PLC control for the barrier with all necessary switching elements and dry contacts is located inside the barrier stand casing.
1 no. guard house push-button set "open-close" (box type) included.

Similar products