For all practical purposes, when you see a door with a horizontal bar on the inside designed for emergency exit, the terms Panic Bar, Door Push Bar, and Crash Bar are all used to describe the same life-safety mechanism.
The most precise and legally correct term, especially when dealing with building codes and fire doors, is Panic Exit Device (or Fire Exit Hardware).
Panic Exit Devices
7 products
There is no available product.
It seems like we couldn't find any matches for your current filters. Try adjusting your filters to explore more options.
Recently seen
FAQs
A panic bar (also widely known as a crash bar or panic exit device) is a crucial piece of safety hardware installed on the interior side of emergency exit doors in commercial and public buildings. Its primary function is to allow for immediate, effortless, and rapid exit during emergencies like a fire or security threat.
The mechanism operates on a simple, instinctive mechanical principle:
- Resting State: The door is secured by a latch bolt (or multiple bolts in vertical rod systems) that extends into the door frame. Return springs hold the horizontal bar (the panic bar) in a neutral position.
- Activation: An occupant applies force (a push or even a slight bump) anywhere along the length of the horizontal panic bar.
- Mechanical Action: This applied pressure triggers a system of internal levers, springs, and connecting rods within the device housing.
- Latch Retraction: The movement of the levers and rods translates the force into lateral movement, causing the latch bolt to fully retract from the strike plate in the door frame.
- Instant Exit: With the latch retracted, the door is instantly unlocked and free to swing open in the direction of the exit, requiring no key, turning, or special knowledge to operate.
- Reset: Once the pressure is released, the springs return the latch bolt and the bar to their secured, locked position (ready for re-latching when the door closes).
This system is deliberately simple and highly effective, ensuring that even in a chaotic, high-stress situation, anyone—including children or people with limited mobility—can quickly escape with a single push.
All compliant exit devices provide the "panic" function, but only those specially certified as Fire Exit Hardware meet the integrity standards for use on a fire-rated door assembly.
When a door is designated as a Fire Door (designed to stop the spread of fire and smoke), the panic device installed on it must be specially tested and labeled as Fire Exit Hardware.
Panic bars, or Panic Exit Devices, do not come in one single fixed size. Instead, they are manufactured in standard lengths designed to be cut down and customised to fit a range of common commercial door widths.
The crucial requirement according to most building codes is that the actuating portion (the bar or push pad) must extend for at least one-half of the door's width to ensure easy operation in a panic situation.
Standard Panic Bar Sizes (By Door Width)
Panic bars are typically sold in sizes that correspond to the maximum door width they can cover:
36 inch device:Fits doors up to 36 inches (approx. 91 cm) wide.
48-Inch Device:Fits doors up to 48 inches (approx. 122 cm) wide.
Wider Options:Available for doors up to 60 inches or more.
While panic bars are designed to be highly versatile, the answer is No, they cannot be installed on all types of doors, but specialized versions exist for almost every common commercial door type.
The door's material, construction, and security needs will dictate which specific Panic Exit Device is required:
Metal/Steel Doors: All types work well. Concealed Rods are common for a clean look, but require a factory cut-out.
Wood Doors: Mortise devices require a large pocket cut into the wood, and wood must be sturdy (not hollow-core). Rim devices are simpler to install.
Glass Doors (Aluminum/Storefront): Requires specialised hardware (narrow stile devices) designed to fit the thin metal frame around the glass. Often uses surface-mounted systems.
Maintaining a door push bar (Panic Exit Device) is crucial, as it is a life-safety device that must function perfectly during an emergency. Here are the key steps for maintaining a door push bar:
- Routine Inspection (Weekly/Monthly)
- Tightening and Alignment (Monthly/Quarterly)
- Lubrication (Bi-annually)
- Code Compliance Check
For fire-rated doors, the maintenance of the panic bar is legally mandatory and must be documented to prove compliance during inspections.
The core difference between single-point and multi-point panic bars lies in the number of locations where the door is secured to the frame.
Single-Point Panic Bar
This is the most common type, generally used on single doors where the priority is simple, reliable exit.
Locking Points: One (1) point. The door is secured only at the center, on the latch side.
Multi-Point Panic Bar
This term usually refers to Two-Point or Three-Point locking systems. These are preferred for enhanced security, heavy/tall doors, or double-door applications.
Locking Points: Two (2) or Three (3) points.
Regardless of the type, the primary safety function remains the same: one push on the bar releases all locking points instantly for quick emergency exit.
Yes, panic bars (or door push bars) require regular, mandatory maintenance. Because they are critical life-safety devices, their functionality must be guaranteed at all times to ensure rapid evacuation during an emergency. Neglecting maintenance is a common cause of failure and can lead to severe code violations, fines, or catastrophic consequences during a crisis.
Panic Exit Devices and Door Push Bar
When safety is paramount, fast, reliable exit hardware is non-negotiable. That's where Panic Exit Devices come in. Designed for quick, immediate exit, these systems, commonly known as a panic bar or door push bar, encompass all the specialized fittings—from rim to vertical rod types—that ensure occupants can exit instantly during an emergency with minimal effort.
Check out our extensive product listing featuring robust panic bars and reliable door push bars, covering everything from standard surface-mounted devices to sophisticated vertical rod systems perfect for any emergency exit requirement.
Panic Bar (Door Push Bar) Exit Devices for Emergency Doors
A panic bar, or door push bar, is a mechanism installed on emergency exit doors designed to allow occupants to unlock and open the door simply by pushing the bar, regardless of whether the door is locked from the outside.
Their importance cannot be overstated, as they ensure rapid, unencumbered exit during emergencies like fires or security threats, saving precious seconds when it matters most. These systems are categorised primarily by the number of points at which they secure the door to the frame (the locking points).
Types of Panic Exit Devices we Offer
The range of exit devices that we offer, includes:
- Single-Point Locking System
This is the most common and simplest type, ideal for medium-traffic areas where a basic level of security is sufficient. - Two-Point Locking System
This system provides enhanced security and better door sealing, often used on taller doors or where security and weather sealing are concerns. - Three-Point Locking System
The three-point system offers the highest level of security and rigidity, generally used for very tall, heavy-duty, or high-security exit doors.
Key Features & Benefits of Godrej Panic Bar
The primary role of all panic bars is to facilitate safe, quick, and effortless emergency exit. The common benefit provided by all panic bars are:
- Simplicity: They require no complex actions (like turning a knob or key), only a simple, instinctive push.
- Accessibility: They meet requirements for accessibility standards (ADA), as they require minimal force to operate.
- Speed: By providing instantaneous unlocking at the critical moment, they drastically reduce evacuation time and prevent crowding or jamming at the exit point.
The range of panic bars that we offer, includes:
- Single-Point Locking System
This is the most common and simplest type, ideal for medium-traffic areas where a basic level of security is sufficient.
- Mechanism: The lock engages at a single point—usually the latch located on the door's side edge (the strike side).
- Activation: Pushing the panic bar retracts the single latchbolt, immediately releasing the door.
- Types:
- Rim Panic Device: The locking mechanism (latch and housing) is surface-mounted on the interior side of the door.
- Mortise Lock Panic Device: The mechanism is concealed within a pocket (mortise) inside the door, offering a cleaner look and higher security against forced entry.
- Two-Point Locking System
This system provides enhanced security and better door sealing, often used on taller doors or where security and weather sealing are concerns.
- Mechanism: The door is secured at two points, typically at the top and bottom of the door.
- Activation: Pushing the door push bar simultaneously retracts the latch bolts located at the door's top and bottom edges (vertical latching).
- Type:
- Vertical Rod Panic Device: This system uses rods (often concealed within the door) that extend from the panic bar mechanism to secure latches at the head (top) and sill (bottom) of the frame. This is highly effective for double-door systems and heavy doors.
- Vertical Rod Panic Device: This system uses rods (often concealed within the door) that extend from the panic bar mechanism to secure latches at the head (top) and sill (bottom) of the frame. This is highly effective for double-door systems and heavy doors.
- Three-Point Locking System
The three-point system offers the highest level of security and rigidity, generally used for very tall, heavy-duty, or high-security exit doors.
- Mechanism: The door is secured at three points—the top, the bottom, and the traditional side latch (rim or mortise).
- Activation: Pushing the panic bar retracts the latches at all three points simultaneously.
- Benefit: This provides maximum resistance against forced entry while maintaining the critical function of instant exit in an emergency.
How to Choose the Right Panic Bar for Your Door
Navigating the world of Panic Exit Devices and Door Push Bars requires matching the right hardware to your specific door type, as a one-size-fits-all approach compromises safety and security. Whether you have single wooden doors, heavy steel fire doors, or elegant aluminum and glass double doors, there is a compatible panic solution—from Rim Devices (surface-mounted on single doors) and Mortise Devices (concealed for higher security) to Vertical Rod Systems (essential for double doors).
Selecting the correct device is critical for compliance and performance. Always consider these technical factors:
- Door Type & Material: Different devices are required for Single vs. Double Doors. Check compatibility for the door's material (wood, steel, aluminum, or glass) and its core construction (hollow metal may allow for concealed systems).
- Fire Rating (Fire Exit Hardware): For fire-rated doors, the hardware must be specifically certified (e.g., UL or EN standards). Standard panic hardware is NOT a substitute, as fire-rated hardware cannot have certain hold-open features.
- Locking Points: Determine if you need Single-Point (rim or mortise), Two-Point, or Three-Point Locking (vertical rod systems) based on security needs and the door's height/weight.
- Code Compliance: Ensure the device meets local building codes and standards (like ADA/accessibility, NFPA 101, or EN 1125/179) regarding mounting height (usually 34–48 inches from the floor) and maximum operating force (typically no more than 15 lbs).
- Traffic Volume: For high-traffic areas (malls, schools), choose heavy-duty hardware that is durability-tested for hundreds of thousands of cycles.
Why Choose Godrej Panic Exit Devices?
Godrej has a century-long reputation in India for quality and security. This established brand trust, along with innovative designs and tailored solutions is carried over to their Panic Exit Devices and Door Push Bar, giving buyers confidence in the product's durability and reliability.